Skip to main content

Topic: New Track bar (Read 338 times)

0 Members and 1 Guest are viewing this topic.
  • 1989comanche
  • [*][*][*][*][*]
  • 1989 Comanche P/U
New Track bar
Replaced my track bar today with an adjustable one from Iron Rock Off-road. Was pretty straightforward and simple. 

  • 1989comanche
  • [*][*][*][*][*]
  • 1989 Comanche P/U
Re: New Track bar
Reply #1
First step was to remove old one

  • 1989comanche
  • [*][*][*][*][*]
  • 1989 Comanche P/U
Re: New Track bar
Reply #2
Second step was to replace trac bar bracket with one in kit

  • 1989comanche
  • [*][*][*][*][*]
  • 1989 Comanche P/U
Re: New Track bar
Reply #3
Next was to drill out axle bracket one size

  • 1989comanche
  • [*][*][*][*][*]
  • 1989 Comanche P/U
Re: New Track bar
Reply #4
Then shift axle back towards passenger side 1/2" so bolt lines up

  • 1989comanche
  • [*][*][*][*][*]
  • 1989 Comanche P/U
Re: New Track bar
Reply #5
Measure a few times to check its centered then tighten jamb nut with a big wrench

  • 1989comanche
  • [*][*][*][*][*]
  • 1989 Comanche P/U
Re: New Track bar
Reply #6
Jamb nut