Project "Single Barrel" An LJ build

[jeepster1407]

Holy cow you do live!

I'd buy one of those jam nut thingies.  I think you have a PM from like 6 months ago asking if I could buy some more psc louvers too.

Jeep looking good bro

I?ll look for it. As for the jam but wrench I need to make a Rev 2. I had to cut the little tip off the end

 

[jeepster1407]

That drop down turned out awesome  👍  Did you make it from scratch or is it a kit?

Thanks, From scratch

 

[jeepster1407]

Good to see you around justin, that shifter is sweet!!

Yes sir!!

 

[green50gt]

It holds a little human just nice!  We measured out to make some steel ones before aluminum but much of the same my partner is too busy.  🙁

[member=2]G Beasley[/member] will like the shiney!

Dem rock sliders you made.......daaaannnnggg!

 

[G Beasley]

Damned nice work through and through , the shine only makes it better. I would also buy one of the spanners if you decide to sell them.

 

[davewjcook]

Sign me up as well...
Good stuff there!

 

[1989comanche]

Damned nice work through and through , the shine only makes it better. I would also buy one of the spanners if you decide to sell them.

Me #3 too

 

[Tonellin]

The jam nut spanner is brilliant..I will also buy one

 

[Florpro]

Put me on the spanner list too.

 

[green50gt]

I'm not great at math but that's like a lot Justin!  Let's do this!

 

[jeepster1407]

Its been a while since I've had time to sit down and add to this build thread.

I finished my rear storage compartment. I think it came out nice. Just have to work on some mounting options along the top.

On one of my last wheeling trips I bent the stock skid beyond repair so It was time to install the Tummy Tuck.

That meant I would need to install a SYE on my T-case

And here it is all installed with a whole new exhaust ran and new rear Driveshaft. I ended up having to install a 1" BL to give everything enough clearance. I couldn't massage the firewall enough with the transmission installed and wasn't willing to pull it out just yet.

This brings us to its current state. I was needing some new tires so I went ahead and got some new wheels also. These should last me until I talk the plunge and go 8 Lug.

Last weekend I was able to hit some FS roads with my boy. I'm still getting used to the drawer setup and trying to determine how I want to pack it. Ideally I'd like it to be packed all the time no matter if were Rock Crawling somewhere or cruising around on some FS roads.

This setup SUCKED! The Stanley adventure cook set just barely sits on the single burner Coleman stove. (As you can tell by the water on the stove.) I need one with a little larger base if anyone has any suggestions.

 

[green50gt]

Man that's smexy!  Hey what ever happened to those jam nut wrenches? 

 

[Florpro]

Can you add a grate to the top of your Coleman grill? It would allow cooking of anything with a nice flat base. 

 

[G Beasley]

Make a metal mushroom with cutouts to make the bottom of the pot larger?

 

[jeepster1407]

Make a metal mushroom with cutouts to make the bottom of the pot larger?

Can you add a grate to the top of your Coleman grill? It would allow cooking of anything with a nice flat base. 

I'll try one of these

 

[jeepster1407]

Man that's smexy!  Hey what ever happened to those jam nut wrenches? 

I never ended up making any more

 

[G Beasley]

I never ended up making any more

Sad fellow jeepers...

 

[98tjcomeonuh]

Looks great man, I hate that you had to install the body lift. Not that I'm against them.

 

[Florpro]

Looks great man, I hate that you had to install the body lift. Not that I'm against them.

a small body lift won?t kill you. 

 

[G Beasley]

a small body lift won?t kill you.

Nope , I actually like the ease of access you gain .