TJ/YJ Marked Designs front bumper $225

[green50gt]

Have a couple TJ bumpers for sale. Laser cut and bent 3/16", 3/4" D ring mounts welded front and back, bolts in 10 places - fits under stock sway bar or works with aftermarket sway bar.

These are bare steel.

$225. No trades.

Anywho. PM me.

 

[Florpro]

Helluva deal!!!

 

[bobthetj03]

Heck yeah!

 

[TexasTJ]

That price is too good, wish I didn't already have a bumper.

 

[Florpro]

That price is too good, wish I didn't already have a bumper.

Sell yours and trade up...

 

[green50gt]

Bump.

Got a couple bare metal stage 2 bumpers that need to go to a new home.  Welds have been ground smooth on the sides.

 

[bobthetj03]

Do you have any of the new/improved fairlead mounts?

 

[green50gt]

Do you have any of the new/improved fairlead mounts?

They're still stuck in proto mode because the one I sent out to be tested is still sitting on a shelf..  I have one that could be sent out to a willing participant who is going to put it through its paces.

EDIT* Are you experiencing a problem with yours?

 

[bobthetj03]

They're still stuck in proto mode because the one I sent out to be tested is still sitting on a shelf..  I have one that could be sent out to a willing participant who is going to put it through its paces.

Come on Rob, shit or get off the pot brah!

 

[green50gt]

Come on Rob, shit or get off the pot brah!

I didn't name any names for the record!

Are you having a problem with yours?

I am hoping to get a little feedback from [member=236]98 tj sport[/member] on his Christmas bumper.

 

[bobthetj03]

I didn't name any names for the record!

Are you having a problem with yours?

I am hoping to get a little feedback from [member=236]98 tj sport[/member] on his Christmas bumper.

I haven't put it in a situation yet, but I do notice it bends pretty easy when I suck some tension on the cable to keep my D-ring from rattling.

 

[green50gt]

I haven't put it in a situation yet, but I do notice it bends pretty easy when I suck some tension on the cable to keep my D-ring from rattling.

Ok.  Yeah it is kind of an industry standard style if you will.  We've sold a whole bunch of them and I gather that for most of the population they will operate as they are expected.  Rob had some goofy side pull and bent that one all to heck, which brought up a need for some strength, and also allowed us to address the need for a fairlead mount for our aluminum bumpers*.



*The upgraded fairlead mount has a matching bottom plate that essentially sandwichs the aluminum.  I had fear of the bolts pulling out of the aluminum, so basically it would have to rip the entire top off the bumper taking the winch with it..

 

[G Beasley]

[member=205]Florpro[/member]  [laugh]

 

[98 tj sport]

I didn't name any names for the record!

Are you having a problem with yours?

I am hoping to get a little feedback from [member=236]98 tj sport[/member] on his Christmas bumper.

Haven't had a warm enough day that I wasn't slammed to get it painted and put on. I did think about welding some kind of gusset on the back to help keep it from bending under load since it's just the single bend with no support.

 

[Florpro]

[member=205]Florpro[/member]  [laugh]

Hey I was at KOH.

 

[green50gt]

Bump...

 

[Florpro]

Upgraded fairlead mount installed. And tested. I was not able to see it in action because of the precarious position I was in...
The new fairlead mount was a little close to my winch. Some quick grinder action and all was good.

 

[green50gt]

Thanks [member=205]Hard Line Rob[/member] How did the aluminum fare against big moab rocks?

 

[Florpro]

Thanks [member=205]Hard Line Rob[/member] How did the aluminum fare against big moab rocks?

I certainly bashed it a couple times... I?ll have to take pictures tomorrow of the scuff marks👊🏻

 

[green50gt]

My partner had one at the shop with a RC8000 winch or something mounted to it, and I could get almost two fingers between the place and the soleniod.  You must be big.

[member=121]Jjeeper09[/member] There are a couple options for you in this thread.  Here are some additional aluminum pics also.