TJ/YJ Marked Designs front bumper $225

[Florpro]

I certainly bashed it a couple times... I?ll have to take pictures tomorrow of the scuff marks👊🏻

As promised. Beaten not broken!

 

[badmonkey]

Rock on brother!  


^^^  see what I did there?   😀

Well earned battle scars, they are.   8)

 

[Florpro]

Rock on brother! 


^^^  see what I did there?  😀

Well earned battle scars, they are.  8)

Yes it is a very low profile unit. I don?t see how folks wheel with a full width unit?

 

[badmonkey]

Yes it is a very low profile unit. I don?t see how folks wheel with a full width unit?

The height at the ends greatly dictates, but yeah, straight bumpers will claw everything. 

 

[green50gt]

Still kickin guys.  We now have a 45 degree bend at the back side of the bumper to aid in flex in winching applications!

 

[TexNVA]

kinda hoping at least one will stay kicking till i get back from the Sahara. Been making a list for when i get home.

 

[green50gt]

kinda hoping at least one will stay kicking till i get back from the Sahara. Been making a list for when i get home.

If not I?ll make you one up special!

 

[Tonellin]

Scrolling through the gram and noticed a nice bumper on an MCE fender post

 

[en480c4]

I need to get some measurements to see if these will work with a weld-on 8274 mount and the stock sway bar. I?m probably not in the market for Antirock until next year. How far in front of the front bumper bolt is the first bend?

 

[green50gt]

Scrolling through the gram and noticed a nice bumper on an MCE fender post

How about that!  Good eye!  I thought that guy also bought a set of sliders from us, but I don't see those.  Help me with something though, I don't see anything that has to do with MCE's on that Jeep?

I need to get some measurements to see if these will work with a weld-on 8274 mount and the stock sway bar. I?m probably not in the market for Antirock until next year. How far in front of the front bumper bolt is the first bend?

Yeah should be no problem at all.  We had someone try it once and it turned out great but I cannot recall what I did with the pictures.  I don't have that info on me right now, but I will certainly get that for you when I get home.  🙂  Thanks for the interest!

 

[janesy]

I need to get some measurements to see if these will work with a weld-on 8274 mount and the stock sway bar. I?m probably not in the market for Antirock until next year. How far in front of the front bumper bolt is the first bend?

I know [member=135]Tonellin[/member] runs a 8274 with this bumper.

 

[en480c4]

Yeah should be no problem at all.  We had someone try it once and it turned out great but I cannot recall what I did with the pictures.  I don't have that info on me right now, but I will certainly get that for you when I get home.  🙂  Thanks for the interest!

I really like the Hanson one, but the TMR Customs seems to be the best bang for the buck. 

 

[green50gt]

I really like the Hanson one, but the TMR Customs seems to be the best bang for the buck.

I am sorry, TMR has what for the best bang?

EDIT**  Sorry, you meant the weld on bracket.  https://www.tmrcustoms.com/collections/bumper-builder-parts/products/warn-8274-universal-winch-mount

Yeah, so id almost guarantee there is plenty of room, but I'd just want to measure to be 100% confident.

Thanks [member=59]janesy[/member] I forgot [member=135]Tonellin[/member] was rocking one..  I stole this pic - bolt on mount but think that's a pretty good idea.  [member=135]Tonellin[/member] Would there be enough room in there to clear the factory sway bar?

 

[Tonellin]

I?m not sure who made my 8274 mount but it fits great on bumper with plenty of room between grille. Note my bumper is the original design without the bend at the rear. The bend in the picture is on the winch mount

 

[Tonellin]

The sway bar would clear no problem as well - again I?m not sure if the new bumper design with the fold in the back would cause an issue. I can say I?ve done a number of hard pulls on this bumper and there has been no flex or bend issues even without the bend on the back of the bumper. I think having a solid winch mount has helped because even though I caved in the front part of bumper with a massive hit it still holds it shape

 

[green50gt]

Excellent man!  Thanks for the pics!  So the 45 sits back farther than that bolt on mount, and it lays back behind the sway bar..  I don't see any issue with fitment.  Good to know!

Thanks, YOU ROCK!

 

[en480c4]

Awesome guys.  Thanks so much!

And sorry about the confusion.  I was talking about the weld-on mounts. 

 

[SaharaNick]

Excellent man!  Thanks for the pics!  So the 45 sits back farther than that bolt on mount, and it lays back behind the sway bar..  I don't see any issue with fitment.  Good to know!

Thanks, YOU ROCK!

I am really interested in this bumper anyway I could still get one? I also run an 8274 as well

 

[green50gt]

I am really interested in this bumper anyway I could still get one? I also run an 8274 as well

Hi Nick.  Yep, I have one in my garage.  I see I have a message Ill check it out.  Thanks!

 

[G Beasley]

I love the hoop add on , really is a clean design.