Dezert's 06 LJ Rubicon

heehawhardy date=1418916903 said:
Haha....at least Tim hasn't trolled this thread and emailed some hogwash on corner specials
Click to expand...
what was that Brad? You wanted some EVO aluminum corners?
http://www.northridge4x4.com/evo-manufacturing-jk-aluminum-rear-rockskin-corners-2doorl-evo1070al
 
Shafts are just about wrapped up. I stripped a stud on the drivers side when pressing them fully in (picture shows half in), so that'll be finished tonight once the parts store gets the stud. Come to find out that the studs are from an early 80s escort. That was fun to track down! Waiting on my corners to come back to me, I let a friend borrow them to build his own. Once those come back, it'll be finished enough to drive it again...
 
Dezerttj said:
Shafts are just about wrapped up. I stripped a stud on the drivers side when pressing them fully in (picture shows half in), so that'll be finished tonight once the parts store gets the stud. Come to find out that the studs are from an early 80s escort. That was fun to track down! Waiting on my corners to come back to me, I let a friend borrow them to build his own. Once those come back, it'll be finished enough to drive it again...
Click to expand...
He is rolling his own corners? The escort studs have to be tough to find...
 
G Beasley said:
He is rolling his own corners? The escort studs have to be tough to find...
Click to expand...

Ya, he has a good sized shop and a small company where he can build them. He just needed to know the radius of the corner.

http://www.nextventuremotorsports.com/
 
Dezerttj said:
Ya, he has a good sized shop and a small company where he can build them. He just needed to know the radius of the corner.

http://www.nextventuremotorsports.com/
Click to expand...
That's pretty impressive!
 
Bought 1.25" JKS BL, 1" JKS MML, and JKS Bar pin eliminators all brand new for $40. We'll see if they come in. BL and MMl will be for my dad's TJ since I already have both, but I will be using the BPEs
 
Dezerttj said:
Bought 1.25" JKS BL, 1" JKS MML, and JKS Bar pin eliminators all brand new for $40. We'll see if they come in. BL and MMl will be for my dad's TJ since I already have both, but I will be using the BPEs
Click to expand...
That sounds too good to be true! Your also in the running for the give away MML too arent you?
 
G Beasley said:
That sounds too good to be true! Your also in the running for the give away MML too arent you?
Click to expand...

The seller said he was just cleaning out his shop. I am entered, but it'll go to a good cause if I do end up winning
 
Tonellin said:
I remember seeing that classified - great deal! That shop is pretty cool...I like the winch plate
Click to expand...

The first responder asked for the price and now he's pissed he didn't get the sale, should have said he'll take them! It's a tiny shop, but their 1/4" rock sliders are beef and really well made! I might be getting some tube work done on the front bumper from them.

G Beasley said:
Does he have any air bumps he wants to "give" away?!
Click to expand...

Haha just put 2 different size cylinders together and epoxy rubber on the end, should work the same right?
 
Dezerttj said:
The first responder asked for the price and now he's pissed he didn't get the sale, should have said he'll take them! It's a tiny shop, but their 1/4" rock sliders are beef and really well made! I might be getting some tube work done on the front bumper from them.
Click to expand...
What shop are you talking about?


Dezerttj said:
Haha just put 2 different size cylinders together and epoxy rubber on the end, should work the same right?
Click to expand...

I am sure it would work great to knock out my teeth...
 
Ordered a savvy 241 cable shifter today. Hopefully that'll fix my 4hi engaging

My first Savvy order... no longer a Savvy virgin  [laugh]
 

https://www.helpavetshine.us/help-a-vet-shine
Top